The voltage 220V
The plug European standard
Material: metal
Size: L 45 cm / 17” W 27 cm / 10,5” H 27 cm / 10,5”
Weight: 12 kg / 27 lb
Plate press machine applies to polymer plates with flat center base. Printable area include only the flat area of the plate, suitable for those printing on classic plate type and require no rim design.
Introduction:
1. Turn the device on. (The machine rated voltage is 220V, the rated input power is 350W)
Set the operation procedure :( the temperature shows F degree)
1).The original temperature: Press the MODE SET KEY once, the set indicator light will be on, Press the key“+” or key “-” to set the original temperature.
2).The Max temperature: Press the MODE SET KEY the second time, the temperature indication light will be on，press the key “+” or key “-”to set the max temperature .
3).The max bake temperature: Press the MODE SET KEY the third time, the time indication light will be on，press the key “+” or key “-”to set the max bake time .
4).Execution mode: Press MODE set key the fourth time, the machine will go into a waiting execution state.
REMARK, the original time setting range 200~380 degree, the Max temperature setting range 200~430 degree.
The max baking temperature time setting range: 0~999 seconds.
The machine has the function of temperature setting self-locking, so if the original temperature is 340 degree, the machine will control the max temperature range 340~430 degree automatically. Conversely, if the max temperature is 250 degrees, then the machine will control the original temperature 200~250 degrees.
Heat transfer printing
Baking slowly: put the products into the mug press, press down the pressure handle, open the
power, so the temperature will go up. When the temperature rises to the original setting temperature, the machine will send out short signal, press the execution key once ,till the machine sends out long signal. Press the execution key again to finish the heat printing. Take out the product, the temperature will come back to the original temperature gradually.
Baking fast: under the original temperature state, fix the object, press down the pressure handle, press the execution key once, until the machine sends out signal, press the execution key again, finish the heat transfer printing. Take out the object, the temperature will come back to the original temperature.